ปั้มจ่ายจารบี พร้อมระบบตั้งเวลาทำงาน [ ตัวถัง ขนาด 650 ซีซี ]

รุ่นl : KSBP-40180C2

◆Features คุณสมบัติ 

* KSBP type and KSCP type have hard springs that are suitable for grease NIGL 000 to 2.
* KSBP and KSCP have similar function. The difference is that KSBP type is controlled by a timer, and
KSCP type is without timer (also could be controlled by Programmable Logic Controller).
* It has a pressure gauge where an operator can check the pressure easily.
* Recommend working with CV type progressive feeders that can easily control the volume of lubricant.
CV type progressive feeder can be assembled with NO (Normal Open) or NC (Normal Close) sensor
switch on request.
* Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities
dropping into the grease tank.
* Please don't fill grease over the maximum red line level.
* Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
 
◆Application of Machines Equipment:
* Suitable for plastic or rubber processing machines, pressing and special purpose machines, etc.
รายละเอียด
* Operation Time : 3sec-12 min
* Interval Time : 1-180in or 1-360 min
* มอเตอร์ : 15w
* ปริมาณสูงสุด : 15 cc/min
* Voltage : 220v
* Ampere : 0.17A./50Hz
* Discharge Bore : 4 mm
* Viscosity : Grease NLGI grease 000 to 2
* วัสดุถัง : 
* ความจุ : 650 CC
* Fixed Hole Distanee (mm) : 65
* ความยาว (มม) : 217
* กว้าง (มม) : 138
* สูง (มม) : 322
* น้ำหนัก : 3.7kg
ข้อมูลเพิ่มเติมPDF

: